PCB Prototyping machine can produce your PCB prototype by its Precision Engraving, Drilling & Routing Functions. Just transfer your PCB design into Gerber file, and let the EP2002 do the rest for you.

(1)   Precision Drilling: It can drill the holes from 0.2mm to 3.175mm by selected drill bits, and also can drill holes bigger than 3.175 mm by simulated routing function by routing tool.

(2)   Engraving: Trace Engraving, Isolating Engraving & Milling off coppers for bigger areas.

(3)Shape Routing: Which can cut outline of the sample PCB in any shape.

EVERPRECISION
11F. No. 872, Jhongjheng Rd., Jhonghe City, Taipei County, Taiwan(R.O.C)
Tel:886 - 2 - 8221 -8088
Fax:886 - 2 - 8221 - 8099 
EMAIL : ep.ep168@msa.hinet.net

We accept standard RS274X/D gerber file exported by your circuit design tool, ie. Protel/PowerPCB/P-CAD/ORCAD or DXF file from AutoCAD.

For the current stage, single & double sided PCB is most often produced by PCB Prototyping Machine. You can also produce up to 6 layers with our MP2820 PCB multi-layer press machine to laminate it.

PCB Prototyping machine use the Registration-pins to align the PCB when producing Double-sided PCB.

If through hole connect is needed, we provide many kind of solution for through hole connect. Please contact us.

Making PCB on with PCB Prototyping Machine takes about few minutes to hours. It depends upon the complication and the density of traces on the PCB. 10 x 10 cm (4”x 4”) medium density sample PCB will takes 1 hour for Engrave each side, and the double-seded PCB.

PCB Prototyping Machine using shank diameter as 1/8”.

Drilling Hole: using drill bit diameters from 0.2mm (0.007”) to 3.175mm (0.125”)

drilling any hole bigger than 3.175mm (0.125”) may use the routing tool with simulation function to complete it.

Engraving Trace: using 60 degree, 90 degree universal tool and 0.5mm, 1.5mm Endmill tool.

Counter Router: 0.8, 1.5 Router bits were suggested.

PCB Prototyping Machine can work on most common used PCB and thickness from 0.4~1.6 mm.

Yes, it is. Especially for those RF boards need a lot of tuning during the design stage, machine will help you to save lots of time. For high frequency as over 1 GHz RF PCB we suggest using EP2002H model, EP2002H with 60,000rpm high speed spindle will help user to get a very accurate trace width and fine trace.

Both the hardware and software are all designed and developed by Everprecision Tech Co., LTD in Taiwan. You can find our machine in most of the leading electronic industries in Taiwan, Korea, China, etc. All these countries now are already rank in the TOP players in the worldwide electronic industries. During the past 8 years, there are al least 500 units were sold to the PCB and electronic industries, a lot of them are worldwide famous in the field.